STRANTOP · MODIFIED ENGINEERING PLASTICS
← Back to Modified PA6A530G — PA6 GF30 Glass Fiber Reinforced Nylon 6
A530G is a polyamide 6 engineering compound reinforced with 30% glass fiber. It is a candidate for injection-molded components requiring a combination of strength and rigidity, subject to application-specific testing and qualification.
A530G Material Overview
PA6 (nylon 6) is a moisture-absorbing engineering thermoplastic. Glass-fiber reinforcement increases rigidity relative to unfilled PA6, but actual properties depend on formulation, molding conditions, specimen conditioning and the test method.
| Product grade | A530G |
|---|---|
| Polymer | PA6 / Polyamide 6 / Nylon 6 |
| Reinforcement | 30% glass fiber |
| Material category | Glass-fiber reinforced engineering compound |
| Processing method | Injection molding; confirm process suitability for the project |
| Manufacturing operation | Zhejiang Dongyuan Plastics Technology Co., Ltd., China |
| International commercial interface | STRANTOP · Irvine, California, USA |
| Typical laboratory values | Obtain the current grade-specific TDS before specifying numerical properties |
The descriptions above are grade identification and application guidance, not specification limits, certifications or guaranteed mechanical values.
Candidate Applications
Current portfolio references include power-tool housings, cable supports and automotive components. Suitability must be verified against actual loads, operating temperature, moisture exposure, molding geometry and any applicable electrical or regulatory requirements.
Technical Data to Confirm Before Qualification
- Tensile and flexural properties, including the relevant ISO test methods and units
- Impact performance and the specimen / test conditions
- Density and thermal properties for the applicable material specification
- Dry-as-molded versus moisture-conditioned performance where relevant
- Color, packaging, processing parameters and regulatory documents for the intended end use
Ask for the current A530G technical data sheet and disclose the conditions of your application. Typical laboratory values should not be treated as contractual limits unless separately agreed.
Manufacturer & International Supply
A530G is part of the modified PA6 portfolio supported by Zhejiang Dongyuan Plastics Technology Co., Ltd. STRANTOP is the international commercial and coordination interface for the commonly owned manufacturing operations. Grade discussion, samples and applicable documentation are coordinated based on the customer project.
To assess A530G, provide your current or reference grade, injection-molding process, required performance, estimated annual volume and delivery country. Learn more about the manufacturing network.
Frequently Asked Questions
Is A530G a 30% glass-filled PA6 compound?
Yes. The A530G portfolio description identifies PA6 with 30% glass-fiber reinforcement.
Is it interchangeable with another supplier's PA6 GF30?
Not automatically. Even at the same nominal fiber loading, formulations and test results can differ. Check the incumbent grade, target properties and production trials.
Can STRANTOP provide a grade-specific TDS or samples?
Request the current technical documents or sample review through the product inquiry form. Availability and project-specific conditions will be confirmed by STRANTOP.
Discuss a reference grade or application
Share your current material, reference grade, application, processing method and performance priorities. STRANTOP will coordinate the appropriate material review with the manufacturing team.
Submit a Product Inquiry